WinXP Welcome screen -> Deploy event to altiris-client1
Altiris Client Service - Restoring configuration, please wait
Windows is shutting down...
[reboots]

BootWorks v. 5.6.45
checking for a network connection
WARNING: a network drive has not been mapped correctly!
Bootwork may not execute correctly
press esc to exit 
using ip address 164.107.120.8 
creating tcp socket for .120.7 on 402
connecting to server at 164.107.120.7...
connecting to socket
waiting 802 ms before attempting to connect to the server

ERROR: Unable to open tcp socket
ERROR: Unable to connect to Deployment Server

Closing tcp connection
TCP stack has been shutdown
Booting to production...

=====================================

Using Intel Pro 100 Family for Win Install Pkg:
NET0111: Error accessing NEMM.DOS. TCP 1.0 not loaded
 NET0111: Error accessing NEMM.DOS. Tiny RFC 1.0 not loaded
Press any key to continue
[key pressed]
Error 7361: IPX or NetBIOS must be running in order to load the network services

Unable to login
[countdown]
[reboot to production]

=====================================

Using Intel 8255x-based PCI Ethernet Adapter Family (10/100):
NET0111: Error accessing NEMM.DOS. TCP 1.0 not loaded
 NET0111: Error accessing NEMM.DOS. Tiny RFC 1.0 not loaded
Press any key to continue
Error 7361: IPX or NetBIOS must be running in order to load the network services.

Unable to login
[countdown]
[reboot to production]

=====================================

Using 3Com 10/100 LAN PC Card:
3Com-Megahertz 574 LAN PC Card Dos NDIS Driver v1.2.003
EOORO: Enabler failed Network adapter not found or not responding.
  Run Diagnostic/Configuration program to verify configuration and operation.
ERROR: Initialization failure.  Driver will not be installed.
Press any key to continue...
[key pressed]
NET0125: NETBIND must be executed before TCP/IP TSR module is loaded.
	Unloadable TCP 1.0 not loaded
NET0116: TCP access failure by Tiny RFC.
	Tiny RFC 1.0 not loaded.
Press any key ton continue...
[key pressed]
Error 7361: IPX or NetBIOS must be running in order to load the network services.

Unable to login
[countdown]
[reboot to production]

=====================================

Using DOS Driver for Intel Pro 1000 Family:
Intel(R) Pro/1000 Network Connections Driver v3.20 031003
Copyright 2000-2003, Intel Corporation.  All Rights Reserved.
Single network interface connection found in slot 0x0370
Slot not specified for driver instance 1.
Loading on PCI device VEN_8086^DEV_100F&SUBSYS_012c1028&REV_01 in slot 0x0370
Media: Copper	Autonegotiated Speed/Duplix: 100 Mbps Full Duplex
Permanent MAC Address: 0008744F9643
  Current MAC Address: 0008744F9643

Microsoft DOS TCP/IP Protocol Driver 1.0a
Copyright (c) Microsoft Corporation, 1991.  All rights reserved.
Copyright (c) Hewlett-Packard Corporation, 1985-1991. All righs reserved.
Copyright (c) 3Com Corporation, 1985-1991.  All rights reserved.
Microsoft DOS TCP/IP NEMM Driver 1.0
MAC/DIS to Packet Driver converter loaded. Version 2.9.6
Copyright 1991 FTP Software, Inc.  All rights reserved.
v1.07, v1.09 by Joe R. Doupnik, jrd@cc.usu.edu, Utah State Univ, 1991
v1.08, v1.10, v1.11 by Dan Lanciani, ddl@harvard.edu
v1.12-v2.9 by Altiris, Inc. 1999-2003, support@altiris.com,
The command completed successfully.
MS-DOS LAN Manager v2.1 Netbind


BootWorks v. 5.6.45
checking for a network connection
WARNING: a network drive has not been mapped correctly!
Bootwork may not execute correctly
press esc to exit 
using ip address 164.107.120.8 
creating tcp socket for .120.7 on 402
connecting to server at 164.107.120.7...
connecting to socket
waiting 802 ms before attempting to connect to the server

ERROR: Unable to open tcp socket
ERROR: Unable to connect to Deployment Server

Closing tcp connection
TCP stack has been shutdown
Booting to production...

=====================================

Using DOS Driver for Intel Pro (prodos2):
[same as above]

=====================================